A stack of pale, freshly sawn pine boards on a cart inside a stainless steel kiln.

Thermally modified wood, straight from our kiln.

We treat pine and ash with heat and steam, so it moves less and resists decay better than untreated wood. We add no chemicals.

Pale boards go in.

We stack kiln-dried lumber on stickers. Steam at 122 to 140 °F evens out its moisture, then we bring the heat up slowly so the boards do not crack.

Heat and steam. Nothing else.

We hold the stack at 374 to 414 °F for 18 to 24 hours in low-oxygen steam. That is the whole treatment.

The wood itself changes.

Hemicelluloses break down and the cell wall holds less water. Less water in the wall means less swelling and shrinking on your job.

Stable boards come out.

We cool the kiln below 176 °F with water mist and air, and condition the wood to 4 to 7% moisture. A typical cycle takes us about 72 hours.

Get a quote

Lay it once. It stays where you put it.

Our kiln changes the wood itself. Every board we ship moves less, resists decay better, and needs no chemical treatment.

Gaps stay even
Boards swell and shrink far less between a wet spring and a dry summer, so decks and facades keep the lines you set.
Resists decay
Better resistance to decay than untreated wood of the same species.
Brown to the core
The color runs through the whole board. Cut it, rip it or profile it and the new face matches.
Nothing added
We use heat and steam only. No chemicals, indoors or out.

Where you'll use it.

Wet thermally modified pine deck boards running toward a pool, with no screws visible.

Decking

We machine smooth, grooved and heavy-section boards for decks, pool surrounds and walkways, for hidden or face fastening.

Reference size 5/4×6 (1" × 5-1/2")

Vertical wood cladding with narrow shadow gaps beside an open batten screen in low sunlight.

Exterior cladding

Reveal, shiplap and overlap facade boards for ventilated rainscreen walls, soffits and fences.

3/8" shadow reveal available

Battens and screening

Planed battens for slatted facades, screens, ceilings and privacy fences.

Surfaced four sides, spacing to your design

Interior and sauna

Wall and ceiling panels in the standard 1×4 sauna profile, plus interior paneling and bench boards.

Reference size 1×4 (15 × 90 mm)

A small home sauna lined in narrow thermally modified pine panels, with slatted benches and a black heater.

Deck, wall, screen and soffit, all from our kiln.

Send us the drawings and we will work through the whole exterior with you.

Get a quote
Two cut board ends side by side on a steel bench: untreated pine, pale all the way through, and thermally modified pine, brown all the way through.
Untreated pine, left. The same species after the kiln, right.

Cut it anywhere. The cut end matches the face.

Our process changes the wood's own chemistry, so the result is in the whole board and not a coating on it. The numbers behind it:

50 to 90% less moisture
The cell wall takes up about 50 to 90% less moisture than untreated wood of the same species.
3 to 5 times more stable
Less water in the wall means roughly 3 to 5 times better dimensional stability, so boards move less through the seasons.
One color, surface to core
A warm, even brown through the whole board, so machined profiles and cut ends match. Tone varies naturally with species, density and batch.

We make two classes. Choose by where the board will live.

Durability

Class TMT-D. A higher-temperature cycle for exterior decking, cladding and battens.

Stability

Class TMT-S. A milder cycle for interior paneling and sauna panels, where stability and tone matter most.

Thermo-Pine
Our core range, in every product family.
Thermo-Ash
Our premium hardwood, for decking, bench boards and battens.
Other species
We quote other softwood and hardwood species on request.

Start with the standard sizes.

One model from each family, for the United States and Europe. Our full catalog has 27 models, and we machine custom profiles to your drawing.

FamilyCodeModelSectionProfile
DeckingVTW-US-546-HFDeck Board 5/4×6 Grooved1" × 5-1/2" (25 × 140 mm)Smooth face, grooved edges for hidden clips
Exterior claddingVTW-US-16-RSRainscreen Siding 1×6 T&G3/4" × 5-1/2" (19 × 140 mm)Tongue & groove
Battens and screeningVTW-US-22-BTBatten 2×21-1/2" × 1-1/2" (38 × 38 mm)Surfaced four sides (S4S)
Interior and saunaVTW-US-14-NGSauna Panel 1×4 Nickel Gap1×4 (15 × 90 mm)Tongue & groove, nickel gap

See all 27 models

Tell us what you're building.

You are talking to the people who make it. Send the rough details and we reply with a quote, lead time and the documents that apply to your market.

Get a quote

+1 (305) 423-9507info@verdellathermalwood.com

Gloved hands driving a stainless screw through a hidden clip on a brown deck board laid over wood joists.