Every model in our catalog.

These are the sizes we make most for each market. Ask for a quote on any of them, or tell us you are not sure and we will help you choose.

Decking

CodeModelSectionProfileQuote
VTW-US-546-HFDeck Board 5/4×6 Grooved Reference size1" × 5-1/2" (25 × 140 mm)Smooth face, grooved edges for hidden clipsQuote this model
VTW-US-546-E4EDeck Board 5/4×6 S4S E4E1" × 5-1/2" (25 × 140 mm)Square-edged, eased edges (S4S E4E)Quote this model
VTW-US-544-HFDeck Board 5/4×4 Grooved1" × 3-1/2" (25 × 89 mm)Smooth face, grooved edges for hidden clipsQuote this model

Exterior cladding

CodeModelSectionProfileQuote
VTW-US-16-RSRainscreen Siding 1×6 T&G Reference size3/4" × 5-1/2" (19 × 140 mm)Tongue & grooveQuote this model
VTW-US-18-RSRainscreen Siding 1×8 T&G3/4" × 7-1/4" (19 × 184 mm)Tongue & grooveQuote this model
VTW-US-78-TGModern Cladding 7/8" × 5-1/4" T&G7/8" × 5-1/4" (22 × 133 mm)Tongue & groove, V-jointQuote this model
VTW-US-16-NGNickel-Gap 1×6 Flat Back3/4" × 5-1/4" (19 × 133 mm)Tongue & groove, nickel gapQuote this model

Battens and screening

CodeModelSectionProfileQuote
VTW-US-22-BTBatten 2×21-1/2" × 1-1/2" (38 × 38 mm)Surfaced four sides (S4S)Quote this model
VTW-US-14-BTBatten 1×43/4" × 3-1/2" (19 × 89 mm)Surfaced four sides (S4S)Quote this model

Interior and sauna

CodeModelSectionProfileQuote
VTW-US-14-VJInterior Paneling 1×4 V-Joint3/4" × 3-1/2" (19 × 89 mm)Tongue & groove, V-jointQuote this model
VTW-US-14-NGSauna Panel 1×4 Nickel Gap Reference size1×4 (15 × 90 mm)Tongue & groove, nickel gapQuote this model
VTW-US-14-MGSauna Panel 1×4 Medium Gap1×4 (15 × 90 mm)Tongue & groove, rounded edgesQuote this model
VTW-US-15-NGSauna Panel 1×5 Nickel Gap1×5 (15 × 119 mm)Tongue & groove, nickel gapQuote this model
VTW-US-26-BNSauna Bench 2×6 S4SEE1-1/2" × 5-1/2" (38 × 140 mm)S4S, radiused edges (S4SEE)Quote this model

Dimensions are reference values, confirmed on the approved order drawing. Verify availability before ordering.

Not on the list?
We make it.

Our catalog sizes are the ones each market specifies most. They are a starting point. We run the machines, so we cut any product to your section, profile or length, for a single house or a repeat program.

Send a drawing or a sample and we will quote it.

Schematic cross-section of a hidden-fastener deck boardwidththickness
Side grooves take a hidden stainless clip. Schematic, not to scale.

Before you specify.

We make our wood for non-structural work: decking boards over a structural subframe, cladding, screening, interior paneling and sauna. Thermal modification lowers bending strength and makes wood somewhat more brittle.

Pre-drill near board ends and use stainless steel fasteners. Your building code, your engineer's specification and the fastener manufacturer's instructions come first.

Tell us what you're building.

You are talking to the people who make it. Send the rough details and we reply with a quote, lead time and the documents that apply to your market.

Get a quote

+1 (305) 423-9507info@verdellathermalwood.com

Gloved hands driving a stainless screw through a hidden clip on a brown deck board laid over wood joists.